My kids were always arguing about who is allowed to ride the small trike on my backyard, so I decided to make a trailer with a seat for it. Time spent was three evenings, couple hours each + painting. The cost of materials is unknown as I only used whatever I found from the garage;…
Hanging firewood holder
This is a very old project of mine. The construction was finished year and a half ago, but I first painted and mounted it now. I can’t really remember how much time I spent on making it but it’s somewhere around 20 hours. I didn’t have a lot of the tools needed for this (nor…
Simple firewood holder – One day build
I needed a firewood holder so I don’t need to place the wood on the ground. My rocket grill works best with rather small pieces of wood, so the size of the holder is reflecting that. I used mild steel for it and finished the build in ~3 hours. The metal twister is my own…
Rocket Grill – Part 2
I love to make very large pancakes on a traditional cast iron pan from Finland called Muurikka (or Muurinpohjapannu as it is officially called). I got the pan few years back and it came with a large gas heater. This was not good enough, so I decided to design a rocket stove inspired wood burner…
Rocket Grill – Part 1
I love to make very large pancakes on a traditional cast iron pan from Finland called Muurikka (or Muurinpohjapannu as it is officially called). I got the pan few years back and it came with a large gas heater. This was not good enough, so I decided to design a rocket stove inspired wood burner…
Metal Twister
I got tired of making twists manually. Even though the twists looked good most of the time, it was very difficult to keep the bar straight if the twist was on a longer area. With this I’m able to do up to 1 meter long twists and they turn out perfect every single time. Build…
New welding table and adapting my garage for metalworking
I had been planning to adapt my garage for metalworking for some time already, and finally I got lucky and found a used tabletop. A small fabrication company was selling it and they had used it as a basic welding table already earlier, so it had the four legs welded on already. So that was…
Metal yarn holder
My son’s godmother is an amazing crocheter, and always hand makes all birthday and Christmas presents. As Christmas was getting close, I decided that I will hand make something for her as well; namely a metal yarn holder. The plan was to make the base so heavy that it can be placed on the floor…
‘Cold Forged’ banister
Our cellar staircase was missing a bannister so I decided to give a go on building one. I was lacking most tools required for bending metal, so a lot of that work was improvised. The result was well beyond my expectations considering that I had never done this kind of work. Build log:
Sauna dressing room bench with hinges
Ever since I built my new sauna, I ended up sitting on a foldable chair in the dressing room while we were cooling down with my wife. You can guess who was using the nice bench in there… As the dressing room is very small, there is no place for another bench. The only solution…